Author Topic: Exercise in FRUSTRATION  (Read 1956 times)

0 Members and 1 Guest are viewing this topic.

Offline ron parola

  • Jr. Member
  • **
  • Joined: Apr 2014
  • Location: northern california
  • Posts: 58
Exercise in FRUSTRATION
« on: Wednesday,October 28, 2015, 05:14:40 PM »
ARGGGH  :headbanger:   OK went to start shake cruises, we are on a STEEP hill, all good down hill turned about, stopped for a truck, went about 20 ft and car CEASED to proceed. Towed back up the hill.. oy  Turns out my  new HOT ROD stub axle failed; right side weld failed.... groan. Possibly my fault because I had machined the axle to fit my hubs, but there doesn't seem to be a lot of weld metal there. Will deal with THAT next week, motorbike ride this weekend!! Promised pix resized... MAYBE.. ronp
« Last Edit: Wednesday,October 28, 2015, 05:38:30 PM by LotusJoe »

Offline LotusJoe

  • Twink Driver
  • Administrator
  • Super Member
  • **
  • Joined: Apr 2012
  • Location: Southern California
  • Posts: 941
  • Forum Administrator
    • LotusEuropa.org
Re: Exercise in FRUSTRATION
« Reply #1 on: Wednesday,October 28, 2015, 05:39:54 PM »
Where did you get the rear hubs?
Joe Irwin
3927R TC Special
(The Classic Barn Find)


Offline BDA

  • Super Member
  • *******
  • Joined: Jul 2012
  • Location: North Carolina
  • Posts: 9,997
Re: Exercise in FRUSTRATION
« Reply #2 on: Wednesday,October 28, 2015, 06:06:46 PM »
Did you cast your own uprights?

Offline Chuck Nukem

  • Super Member
  • *******
  • Joined: Mar 2013
  • Location: Denton TX
  • Posts: 1,082
Re: Exercise in FRUSTRATION
« Reply #3 on: Wednesday,October 28, 2015, 08:29:49 PM »
I wanna see core making and casting pics!!

Offline ron parola

  • Jr. Member
  • **
  • Joined: Apr 2014
  • Location: northern california
  • Posts: 58
Re: Exercise in FRUSTRATION
« Reply #4 on: Thursday,October 29, 2015, 09:38:16 AM »
I made the cores and had them cast in San Jose. The only thing I didn't do was make the lower part of them completely hollow, THAT would have been a LOT more work for just a savings of a few ounces. I made these because I felt that a major part of the stub axle problems were because of the aluminum moving around the bearings, not supporting them. So the castings are thicker ( yeah heavier, sorry Colin) around the bearings. I'll take a picture next week, first gotta figure out WHAT to do about my stub axles! ronp

Offline EuropaTC

  • Super Member
  • *******
  • Joined: Jun 2012
  • Location: Lincolnshire, UK
  • Posts: 3,140
    • LotusLand
Re: Exercise in FRUSTRATION
« Reply #5 on: Thursday,October 29, 2015, 09:49:25 AM »
I think the castings look great Ron, I would also have beefed them up a touch around the bolt holes.  If they are a solid lump then your foundry have done well, I would have expected shrinkage problems with that volume of metal so your guys must have been very careful on the cooling/solidifying cycle.

And the big thing is it's nice to see such unique parts being re-manufactured. I'd hold on to patterns, you might get calls for repeat orders !

Brian

Offline Rosco5000

  • Sr. Member
  • ****
  • Joined: Jun 2015
  • Location: Abbotsford, BC, Canada
  • Posts: 385
Re: Exercise in FRUSTRATION
« Reply #6 on: Thursday,October 29, 2015, 12:50:53 PM »
Those recast uprights look really good!  I bet you would find that there will be some demand down the road for those.
1974 Europa Special
1969 Europa S2
1970 Lotus Elan +2
1978 Austin Mini - 1275, big brakes
1991 Ford Explorer - Lifted on 33s, custom lift and radius arms
2005 Chrysler 300C - chipped, lowered 22s
2011 Cadillac Escalade - Stage 3 cam, Headers, CAI, 2,600 stall converter

Offline BDA

  • Super Member
  • *******
  • Joined: Jul 2012
  • Location: North Carolina
  • Posts: 9,997
Re: Exercise in FRUSTRATION
« Reply #7 on: Thursday,October 29, 2015, 01:43:39 PM »
I made the cores and had them cast in San Jose. The only thing I didn't do was make the lower part of them completely hollow, THAT would have been a LOT more work for just a savings of a few ounces. I made these because I felt that a major part of the stub axle problems were because of the aluminum moving around the bearings, not supporting them. So the castings are thicker ( yeah heavier, sorry Colin) around the bearings. I'll take a picture next week, first gotta figure out WHAT to do about my stub axles! ronp
The stub axles are real weak point (though I've heard that the situation is much better on the TC - I hope so!). They should have been heat treated. There's a guy on eBay who makes replacements that made of heat treated 4140 chrome-moly. I believe there is a BMW stub axle that can be adapted and there are plans to adapt Corvair stub axles (if they can still be found). Check out the knowledge and the manuals section of lotus-Europa.com for more info.

Offline ron parola

  • Jr. Member
  • **
  • Joined: Apr 2014
  • Location: northern california
  • Posts: 58
Re: Exercise in FRUSTRATION
« Reply #8 on: Sunday,November 01, 2015, 04:14:50 PM »
These ARE the EBAY stubs!! Will reweld and re heat treat rp

Offline BDA

  • Super Member
  • *******
  • Joined: Jul 2012
  • Location: North Carolina
  • Posts: 9,997
Re: Exercise in FRUSTRATION
« Reply #9 on: Monday,November 02, 2015, 06:30:18 AM »
Bummer!! Good luck. Let us know how it turns out.