Europa TCST

[dakazman]

  No .. probably much better for larger feet.
 I only drove literary madness’s car, without shoes, which reminds me to buy a pair of sand shoes our drivers shoes . I have a 10 1/2 eee foot . That’s why I mentioned an adjustable sections on the shaft.
Dakazman

[BDA]

You can give yourself some extra right foot room by shaving off the right and/or left side of the brake pedal pad and more space by shaving off 1/8” to 1/4” from the pedal itself. You should be able to get your 10 1/2 EEE foot on either the gas or brake or both.

[dakazman]

  Thanks BDA,  copying and pasting that to a “to-do list.”
Dakazman

[cwtech]

  The pedals definitely look good.
  I see too that they the TCs' jog outward more than an S2s'.
   
Dakazman

When I bought the Europa, which is now TurboFource's, the dealer bent the clutch pedal to allow more room for my big feet.

[BDA]

I might try bending the brake pedal first but be careful that it doesn't rub on the steering column.

[TurboFource]

Got slowed down this week...it took 3 years but all three of us (my son, then wife, then me) tested positive for covid for the first time this week .... day 3 of covid and I managed to finish my pedal assembly and upgraded the clamps I had put on my trailing arm frame bushings...

[BDA]

Hope you all are coping with the Wuhan flu ok and get over it quickly!

Your pedals look nice. Is the brake pedal meant to be adjustable left to right?

[TurboFource]

BDA, yes. I want to make sure I am in line with the master cylinder so I am pushing it straight.

[TurboFource]

Pedals temporarily mounted...hope to bleed brakes this week.... Good thing I made brake pedal adjustable side to side...

Has anyone else made pedals from those drawings

[TurboFource]

The pedals still move when they are bolted down too 

[BDA]

  

[Bryan Boyle]

Got slowed down this week...it took 3 years but all three of us (my son, then wife, then me) tested positive for covid for the first time this week .... day 3 of covid and I managed to finish my pedal assembly and upgraded the clamps I had put on my trailing arm frame bushings...

Hope you all recover without incident from the Wuhan flu.  Gone through 2 bouts.  Had all the jabs.  Still got it.  Gave me time to work on things (just as you have) last year whilst self-isolating from society. 

Pedals look super.  Nice work!

[TurboFource]

Brakes bled today.....took awhile using gravity/vacuum/manual bleeding (used PVC pipe to push on
pedal while doing the rears). Took several rounds of snugging fittings to sneak up on no leaks. My first time doing brake line flares and happy to say I didn't need to redo any 

[Bryan Boyle]

Brakes bled today.....took awhile using gravity/vacuum/manual bleeding (used PVC pipe to push on
pedal while doing the rears). Took several rounds of snugging fittings till there were no leaks. My first time doing brake line flares and happy to say I didn't need to redo any 

great flare tool, guy. 

I used the Gunson EEZIBLEED kit when I did mine after excising the boosters and building the jumpers.  Worked a treat; one-person job.  Just a suggestions for the next time.

[TurboFource]

I will have to order one Bryan!