FS Europa bits

[JasonH]

I am selling my parts collection.  One side of me says "don't do it" you will need those parts!  The other side says "you are never going to need those parts"  The second voice is winning.  So here it goes:
Diagonal chassis supports behind engine above gearbox  $25+ shipping
Seatbelt to frame support brackets $50+  Looks like I don't have seat belts
pedal assembly (not rusted out) but some surface rust $25+ ((SOLD))
seatbelt reel cover $10+
Complete 336 linkage $60+
Aluminum set of 13" panasport style rims 2@ 6" and 2@7" wide  $100+ (need refinishing)
One Lotus brand alloy $50+
Set of window winders $40+

Images up.  More to come.   E-mail me for high res. images @  ocelotspost@yahoo.com   You can pm me, but I don't get on the board as often as e-mail.  You can call me too if you prefer.
Thanks;
Jason
970 401 3899

More to come as I start digging. 

[JasonH]

Ok. I'm getting the hang of this.  More stuff:
Custom Radiator that goes with ducted bonnet $300+ for both. (I'll get a pict of the bonnet up later)
Set of vertical links with hubs and rotors. (no bearings) $100+ for the set
Some nice home made refinished S2 Deck lid Grilles $40+ I also have the deck lid with mounts that they work with 
Random interior bits. If you see something you need make me an offer
Trippy glovebox door with flip up (broken) mirror $40+ This thing is cool but not light
Sun visor mount trim pieces (vinyl gone on one) $40
Ventilation sub assemblies $20
If you think my prices are too low you can offer more.  If they are too high let me know and make me an offer
Regards;
Jason H

[JasonH]

More stuff:
Steering shaft to rack and rack $80+  (I'll get a shot of the rack when I find it)
Rear Spax adjustable (used) $40+
Various Koni fronts (used) Stock height and lowered  $40+ for the stock ones and $60+ for the lowered ones
Also in the shot a cheapo method of lowering the front end with the shock top mount extenders (sketchy but it works)
Some factory suspension arms with Rose joints fabbed in on the end $140+ for the set
Engine mounts  $20+ for the set
Twin Cam fuel filler caps with extension hose and new gaskets. $60+
Blower with repaired damage to housing $20+
Brake master with braided lines thrown in  (need to inspect bore before I sell it) This is for a non servo application
Disintegrating glovebox but stickers inside might be worth something howabout $5+
Interior bits... If you see what you need let me know and I will get them to you
New struts for doing the engine cover $40+  You would have to fabricate mounts
Wiper arms and blade $40+

 

 

[JasonH]

More stuff:
stock stabilizer bar and links $40+
Various body trim in ok to good shape  If you need anything in particular let me know
Aftermarket steering wheel $30+  I do have the lotus badge to go in the middle just gotta find it
Speedo cable $20+ Clutch cable $20+
Bolt/glue on fender flares from the guy up in the Pac Northwest  I think I paid $250   Howabout $200

[sandy]

    Hello Jason, I am looking at the allow wheel you have pictured. It looks like the is a rivet with a hole in it on the inner face of the wheel. Can you take a closer look and tell me what that is please? Thank you. Sandy

[jbcollier]

That's the tire valve with a funky cap on it.

[sandy]

   Really? I guess I should have known that. I may be interested in that one. Do you have any center caps? Sandy

[JasonH]

Hi Sandy  Sorry, no center caps.  Sold those to a local 7 owner who's car I work on.  Yep, it is a metal valve stem cap

[sandy]

   OK Jason, if you can assure me it is a straight wheel, I would like to buy it from you. I am in CT. I have PayPal. Do we do this offline on private email? How do we get that info to each other?

[JasonH]

My E-mail.  ocelotspost@yahoo.com
I will chuck it up in the wheel balancer and have a look. I'll take a short video for you to see for yourself. 
Gimme a shout

[sandy]

Hmmm. Not sure how you did that. You got me that message to my email account. What a break through. I must learn how to do that.

[LotusJoe]

Jason, Sent you an email on some parts.

[sandy]

   Jason, not sure if you are getting my emails. Been trying to reach you.

[sandy]

    Jason I am still interested in the Lotus alloy wheel if you still have it. sandybrainsky(at)yahoo.com

[Runningwild]

Jason. I'm looking for seat brackets. Only need the one that bolts to the floor. Thanks.  Tom