Shifter arm height, interior TCS

[kram350kram]

Looking for the stock shifter arm height from the plastic console to the top of the shifter arm threads. Any help appreciated.

[BDA]

I'm a bit confused. Are you looking for the distance from the console cover under the gater to the threads in the shifter that the shift knob screws on to?

[SilverBeast]

I'm confused why you'd want to know this too.

Is it because you are making your own lever/shift mechanism?

For standard I didn't think it was adjustable as it's set by where the pivot at the base of the lever mounts into the chassis backbone.

[kram350kram]

Yes BDA, correct . SilverBeast, using a Porsche cable shifter box but with the stock shifter arm modified to fit. Appears in pictures I have seen on the net the shift knob is about level with the bottom of the wood dash?

[SilverBeast]

Will this do?

Sorry, that picture of my knob is bigger than I thought...

[BDA]

Now that I know more about what you're doing, I would think the more important dimension would be from the ball joint in the frame to the top. That's a much more difficult thing to measure in my car.

Measuring from the console cover to just under the shift ball is pretty close to 5 1/2". My console cover is covered with vinyl so it's actually a smidge less than that but I'm sure there are enough variations across Europas that the thickness of the vinyl would be insignificant.

Hope that helps.

[kram350kram]

Thanks to both of you. Perfect !