No Freon 134 in system yet . I had a major crack in a new condenser, had it welded up and pressurized . Seemed good so I installed it , then just vacuumed down and didn’t use a dye because of no Freon. Then I pressurized the system with air and checked with a stethoscope , that’s when I found the crack in pipe under hose and replaced the hose from dryer to compressor and continues to the condenser. I also replaced the evaporator , compressor and receiver dryer. Double checked all o rings, but I did use the old low pressure switch. The only old piece is the high pressure side line to the condenser , it’s pipe so I left it in .
I have it vacuumed down now with that low pressure switch capped, hopefully that’s it .
Dakazman