« previous next »
Pages: [1]   Go Down

Author Topic: Heater and Choke cable routing  (Read 760 times)

0 Members and 1 Guest are viewing this topic.

Offline Europa73

  • Full Member
  • ***
  • Joined: Dec 2016
  • Location: Canada
  • Posts: 228
Heater and Choke cable routing
« on: Saturday,March 18, 2017, 05:32:27 AM »
Hi all,

I currently have the heater and choke cables running through the same hole as my gear linkage.

I this correct - or should they run through the 2 small holes above the linkage - per the attached pic.

any thoughts?

Thanks
Logged
also restoring 69 Elan +2 and driving a 1975 TR6

Offline jbcollier

  • Super Member
  • *******
  • Joined: Nov 2013
  • Location: Edmonton, Alberta, Canada
  • Posts: 5,978
Re: Heater and Choke cable routing
« Reply #1 on: Saturday,March 18, 2017, 06:57:23 AM »
http://www.lotus-europa.com/manuals/s2misc/framebulkhead.jpg

AFAIK, the choke and heater cables run outside the chassis.
Logged

Offline Roger

  • Sr. Member
  • ****
  • Joined: Aug 2012
  • Location: Richmond, Texas
  • Posts: 400
Re: Heater and Choke cable routing
« Reply #2 on: Saturday,March 18, 2017, 01:56:17 PM »
If you have a TC though, they run through the small holes you mention.
Logged

Offline Europa73

  • Full Member
  • ***
  • Joined: Dec 2016
  • Location: Canada
  • Posts: 228
Re: Heater and Choke cable routing
« Reply #3 on: Saturday,March 18, 2017, 04:21:30 PM »
Many thanks,

Yep - I have the TCS - Looks like fun times ahead re-routing those cables :-(

Cheers,


Rod
Logged
also restoring 69 Elan +2 and driving a 1975 TR6

Offline Roger

  • Sr. Member
  • ****
  • Joined: Aug 2012
  • Location: Richmond, Texas
  • Posts: 400
Re: Heater and Choke cable routing
« Reply #4 on: Sunday,March 19, 2017, 06:02:20 AM »
It's not at all difficult, I've just done it.
Logged
Pages: [1]   Go Up
« previous next »