Author Topic: Hello, I'm a new member  (Read 3513 times)

0 Members and 1 Guest are viewing this topic.

Offline jbcollier

  • Super Member
  • *******
  • Joined: Nov 2013
  • Location: Edmonton, Alberta, Canada
  • Posts: 5,968

Offline Jake17

  • Newbie
  • *
  • Joined: Jul 2016
  • Location: Wappingers Falls, NY
  • Posts: 4
Re: Hello, I'm a new member
« Reply #16 on: Monday,July 18, 2016, 06:31:13 PM »
Whoops, the trim piece you say!  Spent a half hour looking at how the visor was mounted.  Very interesting.  The rod holding the visor has a bend of about 60 degrees not 90 and appears to be tack welded to a piece of metal attached by nut and bolt to the thick part of the roof where it curves around to form the top of the door opening.   Tacked in two places just after the bend and 10 to 12 inches away toward the rod end.  Photos show what I mean.  I had to peal back the trim piece the bottom of which seems to be glued to the top of the door opening.

The best to you all,
Dave

Online BDA

  • Super Member
  • *******
  • Joined: Jul 2012
  • Location: North Carolina
  • Posts: 9,984
Re: Hello, I'm a new member
« Reply #17 on: Monday,July 18, 2016, 06:36:14 PM »
That's the same basic method used on the TC. I think the way it is hidden is different.

Offline jbcollier

  • Super Member
  • *******
  • Joined: Nov 2013
  • Location: Edmonton, Alberta, Canada
  • Posts: 5,968
Re: Hello, I'm a new member
« Reply #18 on: Monday,July 18, 2016, 06:55:45 PM »
Thanks again!