Lotus Europa Community

Lotus Europa Forums => Garage => Topic started by: cal44 on Monday,April 07, 2014, 06:38:02 PM

Title: Clutch pivot
Post by: cal44 on Monday,April 07, 2014, 06:38:02 PM

I know this would/should be in the WTB section but I think more traffic lands here.
Looking to see if any supplier sells the clutch cable arm, pin, spring, shaft ect. for a 365 trans with a twin cam.
OR
what is in the picture.  Think of it as I have a bell housing and no guts.  I don't want old rusty junk, as it must be extremely nice.  I don't think it is different for RHD or LHD, or is it?
mike

Title: Re: Clutch pivot
Post by: jbcollier on Monday,April 07, 2014, 07:42:38 PM

Might be helpful if you specified which transmission:  336, 352 or 365.

Title: Re: Clutch pivot
Post by: cal44 on Tuesday,April 08, 2014, 04:08:02 AM

Darn it............I thought you guys could read minds.........correction done, and thanks.

mike

Title: Re: Clutch pivot
Post by: Lotusjps on Tuesday,April 08, 2014, 08:13:39 AM

I have all the pieces except #4 from my special.  I changed out to a hydraulic bearing carrier.  I also have a brand new clutch cable I was thinking of sticking on eBay.  Let me know if you're interested.

Title: Re: Clutch pivot
Post by: cal44 on Tuesday,April 08, 2014, 02:34:39 PM

I didn't know (there are a lot of things I don't know) there was a kit to change over to a hydraulics clutch..........now I don't know what to think...........dang

Title: Re: Clutch pivot
Post by: Lotusjps on Tuesday,April 08, 2014, 04:08:41 PM

Well there's not exactly a kit (that I know of).  I had to get creative getting everything to fit in a very tight space.  I posted some pics in another thread.  http://www.lotuseuropa.org/LotusForum/index.php?topic=439.msg2887#msg2885