Lotus Europa Community
Lotus Europa Forums => Classifieds Forums => eBay - Craigslist Ads - Other Listings => Topic started by: Richard48Y on Friday,March 12, 2021, 08:43:53 AM
-
I am buying the Kent 1600 pushrod engine for a Locost 7 build.
Maybe the TC's are of interest to some of you?
The Holbay TC should make for a lively ride in a Europa.
https://wichita.craigslist.org/pts/d/ar ... 54638.html
Not mine and my only interest is the Kent, maybe the 907 if I can find some additional funds.
-
The link doesn't work for me.
-
Try this, https://wichita.craigslist.org/pts/d/arkansas-city-lotus-engines-and-parts/7274954638.html
This may be the answer to complete that Europa that is being sold less engine out of So. California.
Here is the text:
I have been acquiring Twin Cam stuff for a while and I have too much. I have one complete, together Twin Cam and enough to build three more. This is a list of what I have:
Twin Cam, Weber Headed, Holbay motor, 701M casting "L" block, was a good running engine, been sitting for a couple years, would probably touch up the valves and give it a freshen. Complete with Weber DC40s and I have a header as well. $7000
120E block, needs bored to Lotus pistons, comes with almost new rotating assembly with six bolt crank, Stromberg head, cams, not sure which cams are in it, pan, Lotus cam cover, timing chain tensioner, water pump and backing plate. $3500
2731 Cortina GT block, needs bored to Twin Cam pistons, included, Stromberg head that needs a repair, Lotus cam cover, timing chain tensioner, water pump and backing plate covers, oil pan, have Lotus six bolt crank to go with it. $3000
78 Lotus 907 Euro Spec, out of a RHD Elite, with Lotus 5 speed, complete as it came out of the Elite, has the twin 45 DelOrtos. $1200
Also have 711M Crossflow engine, complete out of a Westfield 7, good running motor. $2500
Have other parts to include crossflow Weber intakes, headers, transmissions, etc.
I also have a rust free Cortina MK II with a cage in it already, no title, bill of sale only, has reinforced shock towers, motor mounts for Twin Cam.
I also have several sets of wheels for Cortinas.
I might also entertain selling my Mallock MK18BW race car, if you know what it is, and are looking for one, give me a shout...
-
Try this, https://wichita.craigslist.org/pts/d/arkansas-city-lotus-engines-and-parts/7274954638.html
That works, thanks.
The Holbay engine is interesting. How does one access the spark plugs? Do the leads route through the hole at the back of the head? And, does the cam cover need removing to pull the plugs? Or am I just missing something?
-
I have no idea, the seller is Blake and you can get his phone number from the CL link.
Holbay certainly do make a clean looking engine.
-
Here are a couple of photos of a Holbay installed in a Lotus 7. I assume those are spark plug wires in the photos.
-
the Holbay cam cover was for a dry sumped unit. no oil filler
-
It looks like there is a center panel that keeps water and dirt out from around the spark plugs.
-
The Holbay engine is interesting. How does one access the spark plugs? Do the leads route through the hole at the back of the head? And, does the cam cover need removing to pull the plugs? Or am I just missing something?
It has a removable panel in the centre, spark plug access is the same as a standard TC once that cover is removed. You can just see the retaining bolts at either end in the centre.
-
Ah, I see it now. That makes sense. It would be a right pain, otherwise, especially on a performance engine. When I think of how many times I've pulled the plugs on my TC...