Lotus Europa Community

Lotus Europa Forums => Garage => Topic started by: Europa73 on Saturday,July 08, 2017, 09:22:19 AM

Title: installing a new speedo cable - never that easy
Post by: Europa73 on Saturday,July 08, 2017, 09:22:19 AM
Hi all,

Got another issue this week.

The speedo cable broke.  Looks like the previous owner had had some issues with it as the retaining sleeve going into the gearbox was split.

I ordered one from Banks – came super quick.

But – it looks different from the one on the car.

The car is a TCS with a five speed box.

The new cable has a flat tab that goes into the gearbox  - but – when I took the old one out the end of the cable was a slightly different shape and had no flat tab end, only the square cable same as goes into the speedo – please see the pics.

Could it be that the slightly different shape does not make any difference?

And

Could the flat tab still be in the gearbox? If yes, do I just pull it out with a long nose pliers? Just a little nervous at the thought of just pulling at things in the gearbox.

Any advice would be greatly appreciated.

Cheers,
Title: Re: installing a new speedo cable - never that easy
Post by: 4129R on Saturday,July 08, 2017, 12:10:00 PM
Does the new cable fit into the gearbox easily? The flat tab may just be a variation on the square inner cable.
Title: Re: installing a new speedo cable - never that easy
Post by: Europa73 on Saturday,July 08, 2017, 03:07:03 PM
Hi there,

Unfortunately not.
Title: Re: installing a new speedo cable - never that easy
Post by: EuropaTC on Saturday,July 08, 2017, 09:45:21 PM
I would have to check because it's been many years since I replaced my cable, but I'm sure the end was much cruder than the new cable you have there. I have an image in my mind of the internal cable being swaged into a square end and that's what slotted into the (352) gearbox.  I had a quick look for pictures and found this on the SJS website which says it's for the 352/365 box. I'm wondering if the 336 box is different  and maybe that's what you have ?

Title: Re: installing a new speedo cable - never that easy
Post by: Stuleslie on Saturday,July 08, 2017, 11:09:47 PM
Just fitted my speedo cable the other day, purchased from Richard and it definitely has a square end for the five speed gearbox. Sorry but it Looks like you have the wrong cable.
Title: Re: installing a new speedo cable - never that easy
Post by: Europa73 on Sunday,July 09, 2017, 06:38:47 AM
Ugh -

Yep it looks like the wrong cable :-(
Title: Re: installing a new speedo cable - never that easy
Post by: Gmg31 on Tuesday,July 11, 2017, 04:24:11 AM
 Mine is a square cable that goes into a 90 degree fitting first and then goes into the gear box via the flat fitting.